This 8.7/15kV multi-core power cable adopts a layered design based on compacted ......
+ VIEW MOREIndustry News
Content
For underground power distribution system design in industrial sites, municipal power networks, wind-power and photovoltaic renewable-energy projects, STA (Steel Tape Armoured) cables are frequently specified for direct-burial installation. As a cable manufacturer serving global EPC contractors and project owners, Wuxi Xinyu Cable has delivered substantial volumes of STA cables for numerous buried power distribution projects. Thanks to balanced mechanical protection, reasonable project costs and stable long-term operating performance, steel tape armoured power cables have become a popular option for underground wiring applications.
An STA cable is a power cable fitted with double-overlapped galvanised steel tape armour, placed between the inner bedding and outer sheath. The standard construction of STA cables manufactured by Xinyu Cables follows this sequence: copper or aluminium conductor → XLPE or PVC insulation → inner bedding → double steel-tape armour → PVC outer sheath.
Different from SWA (Steel Wire Armoured) cables which gain tensile resistance from steel wires, spirally wrapped steel-tape armour delivers radial crush protection. It mitigates damage caused by backfill compression, on-site excavation impacts and rodent gnawing — common hazards encountered by underground buried cables.
⚠️ Note: STA armour provides solid crush-resistance yet limited tensile performance. It is intended for fixed-laying applications and is not suited for scenarios involving heavy pulling force or vertical suspension. If you need support to decide between STA and SWA for your project, reach out to our technical team at +852-68552081 for customised recommendations.
Direct-burial installation refers to laying cables inside excavated trenches without additional protective conduits. This installation approach can lower civil-engineering expenditure and shorten construction timelines, while cables remain exposed to persistent complex underground mechanical stress. Based on practical project insights gathered by Xinyu Cables from worldwide direct-burial assignments, several factors contribute to the broad adoption of STA cables:

STA cables cannot satisfy every underground cabling requirement. Project stakeholders should understand product boundaries to prevent premature cable deterioration: - Tensile performance is restricted; avoid long-distance pulling or vertical hanging layouts. SWA cables are recommended for installations subject to high tensile loads. - Observe the stated bending radius during laying. Excessive bending may deform steel-tape layers and harm inner bedding and insulation materials. Even with armouring in place, trenches for direct-burial cabling shall be prepared with fine sand bedding, proper backfilling and warning tapes in compliance with local electrical codes. Our technical team shares such operational checklists with purchasing clients to facilitate smooth site execution.
Cu/XLPE/PVC/STA/PVC multi-core steel tape armoured power cables manufactured by Wuxi Xinyu Cable conform to relevant IEC international standards and are supplied for varied global direct-burial power-distribution assignments.
Founded in 1996, the company offers eight main product categories including LV/MV power cables, control cables, solar cables and variable-frequency cables. Custom options covering conductor material, core quantity and sheath construction are available for industrial, municipal and renewable-energy projects.
Visit our official website for complete product documentation: https://www.xinyucables.com/
If you are planning direct-burial projects and require datasheets, quotations or technical support for cable selection, please contact our sales team at +852-68552081. Our technical engineers can provide tailored cable-selection suggestions according to your on-site operating conditions and project specifications.
This 8.7/15kV multi-core power cable adopts a layered design based on compacted ......
+ VIEW MORE
This cable is used for fixed installation as a main power supply in low-voltage ......
+ VIEW MORE
This 3.6/6(7.2)kV medium voltage power cable is designed with a copper conductor......
+ VIEW MORE
CU/XLPE/CTS/PVC/DSTA/PVCThis multi-core medium-voltage power cable is built with......
+ VIEW MORE
This multi-core power cable is constructed with copper conductors, XLPE insulati......
+ VIEW MORE
This medium voltage power cable is designed with multi-core copper conductors in......
+ VIEW MORE
Ready To Customise
Your Cable Products?
